หมวดหมู่สินค้า : |
เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล
|
หมวดหมู่สินค้าย่อย : |
DACELL Loadcell Torque sensor
|
ยี่ห้อ : | DACELL |
รุ่นสินค้า : | |
ประเภทสินค้า : |
|
ข้อมูลอัพเดต : | 31/08/2565 08:49 |
รายละเอียดสินค้า/บริการ
ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells · TS21 · TX25 · TB · UU · UU2 · UU3 · UU74 · UM,UMA,UMF · UMM,UMMA,UMMC · UMI · US · US3 · CMT · CS213 CB2, CB4, CB5, CB6 · Loadcell_CB2C. CB2C · Loadcell_CB41 · CB41 · Loadcell_CBC. CBC · Loadcell_CBC25 · CBC25 · Loadcell_CPS. CPS · Loadcell_CP, CPC. Dacell load cell
Specifications | DN-GI200, GI100 |
---|---|
Sensor EXC | A-CH (load cell):DC 10/5V,120mA, B-CH : B-CH(Distance Sensor) |
Input Signal Range | A-CH ;0~±40mA, B-CH :0 ~±10V,4~20mA,0~20mA |
Conversion Speed | A-CH : 4,000times/sec. B-CH : 2000/sec |
Non-linearity | A-CH : ±0.02% F.S +1digit, B-CH : ±0.02% F.S+1digit |
Input Sensitivity | A-CH :1.0㎶/Digit, B-CH :1.0mV/Digit (0~10V) |
Input Impedance | A-CH 10Mohm B-CH :1 Mohm / 50ohm |
Temperature Factor. | ±0.005% of rdg +0.5 digit/℃ |
Analogue Filter | 10,30,300,600 Hz |
Digit | 0~±99999 |
Circumstance | 0~40℃ |
Power | AC 100~240V, 50/60Hz |
Consumed Power | Around 32VA |
Output |
Standard : Relay Output (HH,HI,GO,LO,LL) OPTION:1.RS-232C serial output |
Display Window | STN color LCD, 74(W)×55(H)mm |
Specifications | Accuracy |
---|---|
Application sensor | Strain guage sensor |
Sensor adjustment range | DC 5V |
Zero adjustment range | 100% F.S (auto zero) |
Input signal | 1.0, 1.5, 2, 3mV/V (Dip switch) |
Display | 0000~±19999 |
Display speed | Approx 30times/sec (Adjustment available by buff setting) |
Character height | 7Segment 15mm |
Decimal point | Random setting available |
Sampling speed | Max 100times/sec |
Zero variation | within 0.01%/℃ (1mV/V) |
Sensitivity variation | within 0.01%/℃ |
Usage temperature range | -10~60℃ |
Humidity | less than 80% RH (no des condensation) |
Power source used | DC 7.2V Recharging battery DC 12V Adapter |
The PDN-20 has been designed specifically to operate with strain gauge sensors such as Load cell, Pressure Transducer. LVDT. etc.
Pocket indicator with rechargeable battery.
PEAK HOLD FUNCTION
NG, OK judgments with LED display(with open collector output)
Connectable to computer through USB output cable
Display reverse function.
Ergonomic, heavy-duty metal construction
UNIT CONVERSION : N, kgf, lbf ,ozf
Specifications | Accuracy |
---|---|
Usable Sensor | Strain gauge type sensor (Bridge 350Ω, 700Ω) |
Range of Indication | -99999 ~ +99999 |
A/D Transducer | 16bit , 100times/sec |
D/A Transducer | 12bit |
Indication of Measuring Value | 5 Digit LCD ( Right/reverse display available) |
Measuring Unit | kgf , N , lbf , ozf |
Condition indicating LED | Indication of charge and compare output condition |
Compare Output | High, Low, Good |
Analog Output | DC ± 1V |
Communication Output | USB RS232 |
Range of using temperature | -10℃ ~ 40℃, less than 80% RH (no dew condensation) |
Weight | Approximately 800g |
Power | Nickel hydrogen (NimH), Chargeable Adapter (DC 9V) |
Continuous Use Life | Approximately 40 hours |
Charging Time | Approximately 8 hours |
Standard components | AC Chargeable Adapter , Handy case |
Option | 1. USB cable 2. Connector for analog output and relay output |
SPECIFICATIONS
Specifications | Accuracy |
---|---|
Power Source | DC 9V battery |
Electric current Consumption | 15mA |
LOAD CELL input range | 1.0mV/V ~ 3.0mV/V, Potenticmeter : 100~10KΩ |
Display | 4 1/2 Digit LCD |
Characters displayed | +19999 |
Display Speed | Approx. 10 times/sec |
Decunak point Position | 0, 0.0, 0.00, 0.000 |
A/D Sampling speed | 100 times/sec |
A/D Resolution | 16 bit |
Zero Adjust Range | 100% F.S(AUTO ZERO) |
Data stonage | 500 data can be memorised |
Data output | RS232C Serial Interface |
Specifications | Accuracy | |
---|---|---|
DN130T | DN230A | |
Application sensor | Torque : Brush type torquemeter RPM : Proximity sensor (MP981) |
Torque : Brushless type torquemeter (trC) RPM : Proximity sensor (MP981) |
Sensor authorized voltage | Torque : DC 5V RPM : DC 12V |
Torque : DC 2Vrms, 5kHz RPM : DC 12V |
Zero adjustment range | Torque : 100% F.S (Auto Zero) | |
Input signal | Torque : 0.5 ~ 3mV/V RPM : DC 12V |
Torque : 0.5 ~ 2mV/V RPM : 1 ~ 350 pulse/circle |
Display | Torque : -19999 ~ +99999 RPM : 0 ~ 60000 |
|
Character height | 7 segment LED 14mm | |
A/D converter | Torque 24bit 1000 times/sec | |
D/A converter | Torque 16bit | |
Zero variation | Torque Witdin 0.5㎶/℃ | |
Sensitivity | Torque Witdin 0.01%/℃ | |
Voltage output | DC 0 ~ 10V (4~20mA : in accordance witd customer request) | |
Contact capacity | AC 250V 5A | |
Relay life time | More tdan 5,000,000 times | |
Usage temperature range | -10℃ ~ 60℃ | |
Humidit | Less tdan 80% RH (No dew condensation) | |
Power source used | AC85 ~ 265V 50/60Hz | |
Dimensions | 97 X 97 X 141mm | |
Cutting size | 92.5 X 92.5mm | |
Weight | About 1000g |
Specification | Accuracy |
---|---|
Application sensor | Strain guage sensors |
Sensor authorized voltage (the number of Loadcell connection) |
DC 5V, Loadcell(350?) available 4 |
Zero adjustment range | 100%F·S (Auto Zero) |
Input signal | 0.5~3mV/V |
Display | -19999~+99999 |
Character height | 7 Segment 14mm |
Decimal point | Random setting available |
A/D converter | DN150 : 16bit 5000 times/sec |
DN250 : 24bit 1000 times/sec | |
D/A converter | 16bit 1000 times/sec |
Relay output | Contact capacity : AC 250V 5A, Relay life time : more than 5,000,000 times |
Zero variation | Within 0.5μV/℃ |
Sensitivity variation | Within 0.01%/℃ |
Voltage output | DC 0 ~ 10V (4~20mA : in accordance with customer request) |
Usage temperature range | -10℃ ~ 60℃ |
Humidity | Less than 80% RH (no dew condensation) |
Power source used | AC 85 ~ 265V 50/60Hz |
Weight | 1000g |
Option |
|
Specifications | Accuracy |
---|---|
Application sensor | Strain guage sensor (350Ω or 700Ω) |
Sensor authorized voltage (the number of Loadcell connection) |
DC 5V, Loadcell(350Ω) available 4 |
Zero adjustment range | 100% F·S (Auto Zero) |
Input signal | 0.5 ~ 3.0mV/V |
AD converter | 24bit 1000times/sec |
Answering frequency | DC ~ 10kHz (-3dB) |
Display | -19999 ~ +99999 |
Display speed | Appox. 32times/sec |
Character height | 7Segment 14mm |
Decimal point | Random setting available |
Sampling speed | Max 1000 times/sec |
Zero variation | within 0.5μV/℃ |
Sensitivity variation | 50ppm/℃ |
Voltage output | 0 ~ 10V (4~20mA : in accordance with customer request) |
Usage temperature range | -10℃ ~ 60℃ |
Humidity | less than 80% RH (no dew condensation) |
Power source used | AC 220V 50/60Hz |
Relay output | Contact capacity : AC 250V 5A |
Relay life time : more than 5,000,000 times |
Specifications | Accuracy |
---|---|
Application sensor | Strain guage sensor (350Ω or 700Ω) |
Sensor authorized voltage (the number of Loadcell connection) |
DC 5V, Loadcell(350Ω) available 4 |
Zero adjustment range | 100% F·S (Auto Zero) |
Input signal | 0.5 ~ 3.0mV/V |
AD converter | 24bit 1000times/sec |
DA converter | 16bit 1000 times/sec |
Display | -19999 ~ +99999 |
Display speed | Appox. 32times/sec |
Character height | 7Segment 14mm |
Decimal point | Random setting available |
Sampling speed | Max 1000 times/sec |
Zero variation | within 0.5μV/℃ |
Sensitivity variation | 50ppm/℃ |
Voltage output | 0 ~ 10V (4~20mA : in accordance with customer request) |
Usage temperature range | -10℃ ~ 60℃ |
Humidity | less than 80% RH (no dew condensation) |
Power source used | AC 85 ~ 265V 50/60Hz |
Relay output | Contact capacity : AC 250V 5A |
Relay life time : more than 5,000,000 times |
SD memory Card built in / Compact size
Industrial Control Application with Printing
- Limit / Packer / Checker / Hopper / Testing
6pcs Control Relay built in
A/D Sampling : 200times/sec
Peak / Sample / Average Hold Function
Display Resolution : 1/30,000
Various Options
DN5600 Application | Relay Mode |
General Specification |
|
Input Sensitivity |
0.2㎶ / Digit |
Load Cell Excitation |
DC 10V ( - 5V ~ + 5V ) |
Max. Signal Input Voltage |
Max.32mV |
Temperature Coefficient |
[Zero] ±20PPM/℃ / [Span] ±20PPM/℃ |
Input Noise |
±0.6㎶ P.P |
Input Impedance |
Over 10㏁ |
A/D Conversion Method |
Sigma-Delta |
A/D Resolution(Internal) |
520,000 Count(19bit) |
A/D Sampling Rate |
Max. 200times / Sec |
Non-Linearity |
0.01% FS |
Display Resolution(External) |
1/30,000 |
Display Part |
||
Display |
Parts |
Specification |
Display |
Main Display |
7Segments, 6 Digit RED FND Display |
Size :20.0mm(H)×13 mm(W) |
||
Min. Division |
×1, ×2, ×5, ×10, ×20, ×50 |
|
Max. display value |
999,950 |
|
Under Zero value |
"-" (Minus display) |
|
Status lamp |
Steady, Zero, Tare, SP1. SP2, SP3, SP4, RTxD |
Green color Condition display Lamp (8pcs) |
K e y |
Number, Function Key |
Number Key, Function (16pcs) |
- Option |
|
Option No.1 |
0~10V (Analogue Output) |
Option No.2 |
4~20mA (Analogue Output) |
Option No.3 |
RS422/485(Serial interface) |
Option No.4 |
BCD Input |
Option No.5 |
BCD Output |
Specifications | Accuracy | |
---|---|---|
Load cell excitation | 10VDC±5%, 320mA | |
Input Sensitivity | 0.45㎶/D | |
Zero adjustment range | -0.6mV~42mV : combinations of 6bit dip switch | |
Input | voltage | Max. 32mV |
impedance | 10㏁ (Min.) | |
noise | 0.6㎶p.p or Less | |
A/D converter | type : dual slope type resolution : 1/65,000 counts(16bits) converting speed : 20times/sec |
|
Non-linearity | 0.01% of full scale | |
Temperature-drift | zero ±20PPM/℃ span ±20PPM/℃ |
|
Overload tolerance | 10% of full capacity | |
Display update rate | 20 times/sec |
Specifications | Accuracy |
---|---|
Display unit | 12.7mm(1/2"), 7digits highly bright fluorescent tube sub display : 7segment 12digit Red-FND size : 9.2(H)x4.8(W)mmx1line |
Annunciators | steady, zero, tare, gross, auto, print, hold |
Decimal point position | 0, 0.0, 0.00, 0.000 |
Keyboard | ten key, zero, tare, tare reset, print, gross/net, grand total, sub total, parts, number, hold, reset, auto, code, s/n&enter DN510A : run, standby, sp1, sp2, sp3, sp4 |
External input signal | opical-isolator |
min. Division | x1, x2, x5, x10, x20, x50 |
max. Display | +550,000 |
Rear panel | Loadcell input : 5pin connector Remote control : 5pin input terminal (start, stop, tare, tare reset, zero) BCD input : 37pin connector C ontrol relay : 7pin terminal (final, drib, finish, batch finish, zero) 25pin : connector : 8pin control |
Specifications | Accuracy |
---|---|
Data memory back-up | appr. 10year |
Power | 100/117/120/220/240V AC, ±10%, 50/60㎐ (factory preset) |
Power consumption | appr. 30VA |
Operating condition | temperature : -10~40℃ (14~104℉) humidity : 85% Rh Max. (non-condensing) |
Net weight | 2.4kg |
Gross weight | 3.1kg |
Physical dimensions | (WxDxH) 200x175x105mm / (WxDxH) 7.87x6.89x4.33inch |
Fuse | 250V/1A |
Specifications | Accuracy |
---|---|
Load cell excitation | 10VDC±5%, 320mA |
Input Signal | 0.5 ~ 3.0mV/V |
A/D converting speed | 200times/sec |
A/D converter resolution | 1/520,000 counts(19bits), Δ∑ |
Non-linearity | 0.01% of full scale |
Zero adjustment range | -0.6mV~42mV |
Display Unit | 7 segment, 20.0mm(H)×13.0(W)mm |
Annunciator | steady, zero, tare, gross, auto, print, hold,Interface |
Decimal point position | 0, 0.0, 0.00, 0.000 |
Keyboard | Number key and function key 16 PCS. |
Temperature-drift | zero ±20PPM/℃, span ±20PPM/℃ |
Non-linearity | 0.01% of full scale |
Rear panel | Loadcell input : 5pin connector External control : 12pin input terminal (zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C) |
Power | SMPS Free Voltage (85V~265V) |
Specifications | Accuracy |
---|---|
Load cell excitation | 10VDC±5%, 320mA |
Input Signal | 0.5 ~ 3.0mV/V |
A/D converting speed | 200times/sec |
A/D converter resolution | 1/520,000 counts(19bits), Δ∑ |
Non-linearity | 0.01% of full scale |
Zero adjustment range | -0.6mV~42mV |
Display Unit | 7 segment, 20.0mm(H)×13.0(W)mm |
Annunciator | steady, zero, tare, gross, auto, print, hold,Interface |
Decimal point position | 0, 0.0, 0.00, 0.000 |
Keyboard | Number key and function key 12 PCS. |
Temperature-drift | zero ±20PPM/℃, span ±20PPM/℃ |
Non-linearity | 0.01% of full scale |
Rear panel | Loadcell input : 5pin connector External control : 12pin input terminal (zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C) control relay output : 7pin terminal |
Power | SMPS Free Voltage (85V~265V) |
Specifications | Accuracy |
---|---|
Load cell excitation | 10VDC±5%, 320mA |
Input Signal | 0.5 ~ 3.0mV/V |
A/D converting speed | 200times/sec |
A/D converter resolution | 1/520,000 counts(19bits), Δ∑ |
Non-linearity | 0.01% of full scale |
Zero adjustment range | -0.6mV~42mV |
Display Unit | 7 segment, 20.0mm(H)×13.0(W)mm |
Annunciator | steady, zero, tare, Run, SP1, SP2, hold, Interface |
Decimal point position | 0, 0.0, 0.00, 0.000 |
Keyboard | Number key and function key 12 PCS. |
Temperature-drift | zero ±20PPM/℃, span ±20PPM/℃ |
Non-linearity | 0.01% of full scale |
Rear panel | Loadcell input : 5pin connector External control : 12pin input terminal (zero, tare, tare reset/hold/print, gross/hold reset/subprint, Current loop,RS232C) control relay output : 7pin terminal |
Power | SMPS Free Voltage (85V~265V) |
SPECIFICATIONS
Specifications | Accuracy |
---|---|
Power Source | DC 9V battery |
Electric current Consumption | 15mA |
LOAD CELL input range | 1.0mV/V ~ 3.0mV/V, Potenticmeter : 100~10KΩ |
Display | 4 1/2 Digit LCD |
Characters displayed | +19999 |
Display Speed | Approx. 10 times/sec |
Decunak point Position | 0, 0.0, 0.00, 0.000 |
A/D Sampling speed | 100 times/sec |
A/D Resolution | 16 bit |
Zero Adjust Range | 100% F.S(AUTO ZERO) |
Data stonage | 500 data can be memorised |
Data output | RS232C Serial Interface |
The PDN-20 has been designed specifically to operate with strain gauge sensors such as Load cell, Pressure Transducer. LVDT. etc.
Pocket indicator with rechargeable battery.
PEAK HOLD FUNCTION
NG, OK judgments with LED display(with open collector output)
Connectable to computer through USB output cable
Display reverse function.
Ergonomic, heavy-duty metal construction
UNIT CONVERSION : N, kgf, lbf ,ozf
Specifications | Accuracy |
---|---|
Usable Sensor | Strain gauge type sensor (Bridge 350Ω, 700Ω) |
Range of Indication | -99999 ~ +99999 |
A/D Transducer | 16bit , 100times/sec |
D/A Transducer | 12bit |
Indication of Measuring Value | 5 Digit LCD ( Right/reverse display available) |
Measuring Unit | kgf , N , lbf , ozf |
Condition indicating LED | Indication of charge and compare output condition |
Compare Output | High, Low, Good |
Analog Output | DC ± 1V |
Communication Output | USB RS232 |
Range of using temperature | -10℃ ~ 40℃, less than 80% RH (no dew condensation) |
Weight | Approximately 800g |
Power | Nickel hydrogen (NimH), Chargeable Adapter (DC 9V) |
Continuous Use Life | Approximately 40 hours |
Charging Time | Approximately 8 hours |
Standard components | AC Chargeable Adapter , Handy case |
Option | 1. USB cable 2. Connector for analog output and relay output |
Specifications | Accuracy |
---|---|
Application sensor | Strain guage sensor |
Sensor adjustment range | DC 5V |
Zero adjustment range | 100% F.S (auto zero) |
Input signal | 1.0, 1.5, 2, 3mV/V (Dip switch) |
Display | 0000~±19999 |
Display speed | Approx 30times/sec (Adjustment available by buff setting) |
Character height | 7Segment 15mm |
Decimal point | Random setting available |
Sampling speed | Max 100times/sec |
Zero variation | within 0.01%/℃ (1mV/V) |
Sensitivity variation | within 0.01%/℃ |
Usage temperature range | -10~60℃ |
Humidity | less than 80% RH (no des condensation) |
Power source used | DC 7.2V Recharging battery DC 12V Adapter |
※ Serial Interface (RS-232C) or Current Loop is Standard installed with 1 port.
SD memory Card built in / Compact size
Industrial Control Application with Printing
- Limit / Packer / Checker / Hopper / Testing
6pcs Control Relay built in
A/D Sampling : 200times/sec
Peak / Sample / Average Hold Function
Display Resolution : 1/30,000
Various Options
DN5600 Application | Relay Mode |
General Specification |
|
Input Sensitivity |
0.2㎶ / Digit |
Load Cell Excitation |
DC 10V ( - 5V ~ + 5V ) |
Max. Signal Input Voltage |
Max.32mV |
Temperature Coefficient |
[Zero] ±20PPM/℃ / [Span] ±20PPM/℃ |
Input Noise |
±0.6㎶ P.P |
Input Impedance |
Over 10㏁ |
A/D Conversion Method |
Sigma-Delta |
A/D Resolution(Internal) |
520,000 Count(19bit) |
A/D Sampling Rate |
Max. 200times / Sec |
Non-Linearity |
0.01% FS |
Display Resolution(External) |
1/30,000 |
Display Part |
||
Display |
Parts |
Specification |
Display |
Main Display |
7Segments, 6 Digit RED FND Display |
Size :20.0mm(H)×13 mm(W) |
||
Min. Division |
×1, ×2, ×5, ×10, ×20, ×50 |
|
Max. display value |
999,950 |
|
Under Zero value |
"-" (Minus display) |
|
Status lamp |
Steady, Zero, Tare, SP1. SP2, SP3, SP4, RTxD |
Green color Condition display Lamp (8pcs) |
K e y |
Number, Function Key |
Number Key, Function (16pcs) |
- Option |
|
Option No.1 |
0~10V (Analogue Output) |
Option No.2 |
4~20mA (Analogue Output) |
Option No.3 |
RS422/485(Serial interface) |
Option No.4 |
BCD Input |
Option No.5 |
BCD Output |
Specifications | Accuracy | |
---|---|---|
Load cell excitation | 10VDC±5%, 320mA | |
Input Sensitivity | 0.45㎶/D | |
Zero adjustment range | -0.6mV~42mV : combinations of 6bit dip switch | |
Input | voltage | Max. 32mV |
impedance | 10㏁ (Min.) | |
noise | 0.6㎶p.p or Less | |
A/D converter | type : dual slope type resolution : 1/65,000 counts(16bits) converting speed : 20times/sec |
|
Non-linearity | 0.01% of full scale | |
Temperature-drift | zero ±20PPM/℃ span ±20PPM/℃ |
|
Overload tolerance | 10% of full capacity | |
Display update rate | 20 times/sec |
Specifications | Accuracy |
---|---|
Display unit | 12.7mm(1/2"), 7digits highly bright fluorescent tube sub display : 7segment 12digit Red-FND size : 9.2(H)x4.8(W)mmx1line |
Annunciators | steady, zero, tare, gross, auto, print, hold |
Decimal point position | 0, 0.0, 0.00, 0.000 |
Keyboard | ten key, zero, tare, tare reset, print, gross/net, grand total, sub total, parts, number, hold, reset, auto, code, s/n&enter DN510A : run, standby, sp1, sp2, sp3, sp4 |
External input signal | opical-isolator |
min. Division | x1, x2, x5, x10, x20, x50 |
max. Display | +550,000 |
Rear panel | Loadcell input : 5pin connector Remote control : 5pin input terminal (start, stop, tare, tare reset, zero) BCD input : 37pin connector C ontrol relay : 7pin terminal (final, drib, finish, batch finish, zero) 25pin : connector : 8pin control |
Specifications | Accuracy |
---|---|
Data memory back-up | appr. 10year |
Power | 100/117/120/220/240V AC, ±10%, 50/60㎐ (factory preset) |
Power consumption | appr. 30VA |
Operating condition | temperature : -10~40℃ (14~104℉) humidity : 85% Rh Max. (non-condensing) |
Net weight | 2.4kg |
Gross weight | 3.1kg |
Physical dimensions | (WxDxH) 200x175x105mm / (WxDxH) 7.87x6.89x4.33inch |
Fuse | 250V/1A |
Specifications | Accuracy |
---|---|
Load cell excitation | 10VDC±5%, 320mA |
Input Signal | 0.5 ~ 3.0mV/V |
A/D converting speed | 200times/sec |
A/D converter resolution | 1/520,000 counts(19bits), Δ∑ |
Non-linearity | 0.01% of full scale |
Zero adjustment range | -0.6mV~42mV |
Display Unit | 7 segment, 20.0mm(H)×13.0(W)mm |
Annunciator | steady, zero, tare, gross, auto, print, hold,Interface |
Decimal point position | 0, 0.0, 0.00, 0.000 |
Keyboard | Number key and function key 16 PCS. |
Temperature-drift | zero ±20PPM/℃, span ±20PPM/℃ |
Non-linearity | 0.01% of full scale |
Rear panel | Loadcell input : 5pin connector External control : 12pin input terminal (zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C) |
Power | SMPS Free Voltage (85V~265V) |
Specifications | Accuracy |
---|---|
Load cell excitation | 10VDC±5%, 320mA |
Input Signal | 0.5 ~ 3.0mV/V |
A/D converting speed | 200times/sec |
A/D converter resolution | 1/520,000 counts(19bits), Δ∑ |
Non-linearity | 0.01% of full scale |
Zero adjustment range | -0.6mV~42mV |
Display Unit | 7 segment, 20.0mm(H)×13.0(W)mm |
Annunciator | steady, zero, tare, gross, auto, print, hold,Interface |
Decimal point position | 0, 0.0, 0.00, 0.000 |
Keyboard | Number key and function key 12 PCS. |
Temperature-drift | zero ±20PPM/℃, span ±20PPM/℃ |
Non-linearity | 0.01% of full scale |
Rear panel | Loadcell input : 5pin connector External control : 12pin input terminal (zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C) control relay output : 7pin terminal |
Power | SMPS Free Voltage (85V~265V) |
Specifications | Accuracy |
---|---|
Load cell excitation | 10VDC±5%, 320mA |
Input Signal | 0.5 ~ 3.0mV/V |
A/D converting speed | 200times/sec |
A/D converter resolution | 1/520,000 counts(19bits), Δ∑ |
Non-linearity | 0.01% of full scale |
Zero adjustment range | -0.6mV~42mV |
Display Unit | 7 segment, 20.0mm(H)×13.0(W)mm |
Annunciator | steady, zero, tare, Run, SP1, SP2, hold, Interface |
Decimal point position | 0, 0.0, 0.00, 0.000 |
Keyboard | Number key and function key 12 PCS. |
Temperature-drift | zero ±20PPM/℃, span ±20PPM/℃ |
Non-linearity | 0.01% of full scale |
Rear panel | Loadcell input : 5pin connector External control : 12pin input terminal (zero, tare, tare reset/hold/print, gross/hold reset/subprint, Current loop,RS232C) control relay output : 7pin terminal |
Power | SMPS Free Voltage (85V~265V) |
SPECIFICATIONS
Specifications | Accuracy |
---|---|
Power Source | DC 9V battery |
Electric current Consumption | 15mA |
LOAD CELL input range | 1.0mV/V ~ 3.0mV/V, Potenticmeter : 100~10KΩ |
Display | 4 1/2 Digit LCD |
Characters displayed | +19999 |
Display Speed | Approx. 10 times/sec |
Decunak point Position | 0, 0.0, 0.00, 0.000 |
A/D Sampling speed | 100 times/sec |
A/D Resolution | 16 bit |
Zero Adjust Range | 100% F.S(AUTO ZERO) |
Data stonage | 500 data can be memorised |
Data output | RS232C Serial Interface |
The PDN-20 has been designed specifically to operate with strain gauge sensors such as Load cell, Pressure Transducer. LVDT. etc.
Pocket indicator with rechargeable battery.
PEAK HOLD FUNCTION
NG, OK judgments with LED display(with open collector output)
Connectable to computer through USB output cable
Display reverse function.
Ergonomic, heavy-duty metal construction
UNIT CONVERSION : N, kgf, lbf ,ozf
Specifications | Accuracy |
---|---|
Usable Sensor | Strain gauge type sensor (Bridge 350Ω, 700Ω) |
Range of Indication | -99999 ~ +99999 |
A/D Transducer | 16bit , 100times/sec |
D/A Transducer | 12bit |
Indication of Measuring Value | 5 Digit LCD ( Right/reverse display available) |
Measuring Unit | kgf , N , lbf , ozf |
Condition indicating LED | Indication of charge and compare output condition |
Compare Output | High, Low, Good |
Analog Output | DC ± 1V |
Communication Output | USB RS232 |
Range of using temperature | -10℃ ~ 40℃, less than 80% RH (no dew condensation) |
Weight | Approximately 800g |
Power | Nickel hydrogen (NimH), Chargeable Adapter (DC 9V) |
Continuous Use Life | Approximately 40 hours |
Charging Time | Approximately 8 hours |
Standard components | AC Chargeable Adapter , Handy case |
Option | 1. USB cable 2. Connector for analog output and relay output |
Specifications | Accuracy |
---|---|
Application sensor | Strain guage sensor |
Sensor adjustment range | DC 5V |
Zero adjustment range | 100% F.S (auto zero) |
Input signal | 1.0, 1.5, 2, 3mV/V (Dip switch) |
Display | 0000~±19999 |
Display speed | Approx 30times/sec (Adjustment available by buff setting) |
Character height | 7Segment 15mm |
Decimal point | Random setting available |
Sampling speed | Max 100times/sec |
Zero variation | within 0.01%/℃ (1mV/V) |
Sensitivity variation | within 0.01%/℃ |
Usage temperature range | -10~60℃ |
Humidity | less than 80% RH (no des condensation) |
Power source used | DC 7.2V Recharging battery DC 12V Adapter |
※ Serial Interface (RS-232C) or Current Loop is Standard installed with 1 port.
Specifications | DN-GI200, GI100 |
---|---|
Sensor EXC | A-CH (load cell):DC 10/5V,120mA, B-CH : B-CH(Distance Sensor) |
Input Signal Range | A-CH ;0~±40mA, B-CH :0 ~±10V,4~20mA,0~20mA |
Conversion Speed | A-CH : 4,000times/sec. B-CH : 2000/sec |
Non-linearity | A-CH : ±0.02% F.S +1digit, B-CH : ±0.02% F.S+1digit |
Input Sensitivity | A-CH :1.0㎶/Digit, B-CH :1.0mV/Digit (0~10V) |
Input Impedance | A-CH 10Mohm B-CH :1 Mohm / 50ohm |
Temperature Factor. | ±0.005% of rdg +0.5 digit/℃ |
Analogue Filter | 10,30,300,600 Hz |
Digit | 0~±99999 |
Circumstance | 0~40℃ |
Power | AC 100~240V, 50/60Hz |
Consumed Power | Around 32VA |
Output |
Standard : Relay Output (HH,HI,GO,LO,LL) OPTION:1.RS-232C serial output |
Display Window | STN color LCD, 74(W)×55(H)mm |
Specifications | Accuracy |
---|---|
Application sensor | Strain guage sensor |
Sensor adjustment range | DC 5V |
Zero adjustment range | 100% F.S (auto zero) |
Input signal | 1.0, 1.5, 2, 3mV/V (Dip switch) |
Display | 0000~±19999 |
Display speed | Approx 30times/sec (Adjustment available by buff setting) |
Character height | 7Segment 15mm |
Decimal point | Random setting available |
Sampling speed | Max 100times/sec |
Zero variation | within 0.01%/℃ (1mV/V) |
Sensitivity variation | within 0.01%/℃ |
Usage temperature range | -10~60℃ |
Humidity | less than 80% RH (no des condensation) |
Power source used | DC 7.2V Recharging battery DC 12V Adapter |
The PDN-20 has been designed specifically to operate with strain gauge sensors such as Load cell, Pressure Transducer. LVDT. etc.
Pocket indicator with rechargeable battery.
PEAK HOLD FUNCTION
NG, OK judgments with LED display(with open collector output)
Connectable to computer through USB output cable
Display reverse function.
Ergonomic, heavy-duty metal construction
UNIT CONVERSION : N, kgf, lbf ,ozf
Specifications | Accuracy |
---|---|
Usable Sensor | Strain gauge type sensor (Bridge 350Ω, 700Ω) |
Range of Indication | -99999 ~ +99999 |
A/D Transducer | 16bit , 100times/sec |
D/A Transducer | 12bit |
Indication of Measuring Value | 5 Digit LCD ( Right/reverse display available) |
Measuring Unit | kgf , N , lbf , ozf |
Condition indicating LED | Indication of charge and compare output condition |
Compare Output | High, Low, Good |
Analog Output | DC ± 1V |
Communication Output | USB RS232 |
Range of using temperature | -10℃ ~ 40℃, less than 80% RH (no dew condensation) |
Weight | Approximately 800g |
Power | Nickel hydrogen (NimH), Chargeable Adapter (DC 9V) |
Continuous Use Life | Approximately 40 hours |
Charging Time | Approximately 8 hours |
Standard components | AC Chargeable Adapter , Handy case |
Option | 1. USB cable 2. Connector for analog output and relay output |
SPECIFICATIONS
Specifications | Accuracy |
---|---|
Power Source | DC 9V battery |
Electric current Consumption | 15mA |
LOAD CELL input range | 1.0mV/V ~ 3.0mV/V, Potenticmeter : 100~10KΩ |
Display | 4 1/2 Digit LCD |
Characters displayed | +19999 |
Display Speed | Approx. 10 times/sec |
Decunak point Position | 0, 0.0, 0.00, 0.000 |
A/D Sampling speed | 100 times/sec |
A/D Resolution | 16 bit |
Zero Adjust Range | 100% F.S(AUTO ZERO) |
Data stonage | 500 data can be memorised |
Data output | RS232C Serial Interface |
Specifications | Accuracy | |
---|---|---|
DN130T | DN230A | |
Application sensor | Torque : Brush type torquemeter RPM : Proximity sensor (MP981) |
Torque : Brushless type torquemeter (trC) RPM : Proximity sensor (MP981) |
Sensor authorized voltage | Torque : DC 5V RPM : DC 12V |
Torque : DC 2Vrms, 5kHz RPM : DC 12V |
Zero adjustment range | Torque : 100% F.S (Auto Zero) | |
Input signal | Torque : 0.5 ~ 3mV/V RPM : DC 12V |
Torque : 0.5 ~ 2mV/V RPM : 1 ~ 350 pulse/circle |
Display | Torque : -19999 ~ +99999 RPM : 0 ~ 60000 |
|
Character height | 7 segment LED 14mm | |
A/D converter | Torque 24bit 1000 times/sec | |
D/A converter | Torque 16bit | |
Zero variation | Torque Witdin 0.5㎶/℃ | |
Sensitivity | Torque Witdin 0.01%/℃ | |
Voltage output | DC 0 ~ 10V (4~20mA : in accordance witd customer request) | |
Contact capacity | AC 250V 5A | |
Relay life time | More tdan 5,000,000 times | |
Usage temperature range | -10℃ ~ 60℃ | |
Humidit | Less tdan 80% RH (No dew condensation) | |
Power source used | AC85 ~ 265V 50/60Hz | |
Dimensions | 97 X 97 X 141mm | |
Cutting size | 92.5 X 92.5mm | |
Weight | About 1000g |
Specification | Accuracy |
---|---|
Application sensor | Strain guage sensors |
Sensor authorized voltage (the number of Loadcell connection) |
DC 5V, Loadcell(350?) available 4 |
Zero adjustment range | 100%F·S (Auto Zero) |
Input signal | 0.5~3mV/V |
Display | -19999~+99999 |
Character height | 7 Segment 14mm |
Decimal point | Random setting available |
A/D converter | DN150 : 16bit 5000 times/sec |
DN250 : 24bit 1000 times/sec | |
D/A converter | 16bit 1000 times/sec |
Relay output | Contact capacity : AC 250V 5A, Relay life time : more than 5,000,000 times |
Zero variation | Within 0.5μV/℃ |
Sensitivity variation | Within 0.01%/℃ |
Voltage output | DC 0 ~ 10V (4~20mA : in accordance with customer request) |
Usage temperature range | -10℃ ~ 60℃ |
Humidity | Less than 80% RH (no dew condensation) |
Power source used | AC 85 ~ 265V 50/60Hz |
Weight | 1000g |
Option |
|
Specifications | Accuracy |
---|---|
Application sensor | Strain guage sensor (350Ω or 700Ω) |
Sensor authorized voltage (the number of Loadcell connection) |
DC 5V, Loadcell(350Ω) available 4 |
Zero adjustment range | 100% F·S (Auto Zero) |
Input signal | 0.5 ~ 3.0mV/V |
AD converter | 24bit 1000times/sec |
Answering frequency | DC ~ 10kHz (-3dB) |
Display | -19999 ~ +99999 |
Display speed | Appox. 32times/sec |
Character height | 7Segment 14mm |
Decimal point | Random setting available |
Sampling speed | Max 1000 times/sec |
Zero variation | within 0.5μV/℃ |
Sensitivity variation | 50ppm/℃ |
Voltage output | 0 ~ 10V (4~20mA : in accordance with customer request) |
Usage temperature range | -10℃ ~ 60℃ |
Humidity | less than 80% RH (no dew condensation) |
Power source used | AC 220V 50/60Hz |
Relay output | Contact capacity : AC 250V 5A |
Relay life time : more than 5,000,000 times |
Specifications | Accuracy |
---|---|
Application sensor | Strain guage sensor (350Ω or 700Ω) |
Sensor authorized voltage (the number of Loadcell connection) |
DC 5V, Loadcell(350Ω) available 4 |
Zero adjustment range | 100% F·S (Auto Zero) |
Input signal | 0.5 ~ 3.0mV/V |
AD converter | 24bit 1000times/sec |
DA converter | 16bit 1000 times/sec |
Display | -19999 ~ +99999 |
Display speed | Appox. 32times/sec |
Character height | 7Segment 14mm |
Decimal point | Random setting available |
Sampling speed | Max 1000 times/sec |
Zero variation | within 0.5μV/℃ |
Sensitivity variation | 50ppm/℃ |
Voltage output | 0 ~ 10V (4~20mA : in accordance with customer request) |
Usage temperature range | -10℃ ~ 60℃ |
Humidity | less than 80% RH (no dew condensation) |
Power source used | AC 85 ~ 265V 50/60Hz |
Relay output | Contact capacity : AC 250V 5A |
Relay life time : more than 5,000,000 times |
ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells ตัวแทนจำหน่าย DACELL Indicator DACELL Loadcell Torque sensor Load Cells